Aesonic Electronics

中文  |  EN

关于我们

NEWS

/
/
/
Here are 10 tips for maintaining your headphones

Here are 10 tips for maintaining your headphones

  • Categories:Industry Trends
  • Author:
  • Origin:
  • Time of issue:2019-09-26 18:42
  • Views:

(Summary description)Once we have a headset, the first thing we need to do is to turn it on. We can enjoy it after we get it, but is it ok if we get it? Answer is not, the quality of some headphones themselves is very close, is because we usually do not take care in the use of our beloved headphones premature death! Below I repair the headset process often see the situation, to give you some maintenance advice!

Here are 10 tips for maintaining your headphones

(Summary description)Once we have a headset, the first thing we need to do is to turn it on. We can enjoy it after we get it, but is it ok if we get it? Answer is not, the quality of some headphones themselves is very close, is because we usually do not take care in the use of our beloved headphones premature death! Below I repair the headset process often see the situation, to give you some maintenance advice!

  • Categories:Industry Trends
  • Author:
  • Origin:
  • Time of issue:2019-09-26 18:42
  • Views:
Information
Once we have a headset, the first thing we need to do is to turn it on. We can enjoy it after we get it, but is it ok if we get it? Answer is not, the quality of some headphones themselves is very close, is because we usually do not take care in the use of our beloved headphones premature death! Below I repair the headset process often see the situation, to give you some maintenance advice!
 
1. It is better not to wear headphones when sleeping. It is absolutely impossible for people not to move overnight. After a long time, the earphone cable is either wrapped around the neck or twisted together like twips. Some big earphones even have their shell crushed. The crossbeam of 100, 200 also is more flimsy place at the beginning! If some friends say that I can't sleep without listening to music, it is better to hang the earphone, which is above your head, with a rubber band attached to the earphone cable and hanging by the bed. A tilting headphone will be pulled down when you fall asleep, no matter how you turn over will not be pressed down! The advantage of using a rubber band is that it ACTS as a buffer when pulling the headphones!
 
2. Wipe off the sweat on the earphone line after using the earphone. These things that are secreted by the human body, which contain oil and so on, are invisible killers of wires, like e2c in the bend of the ear. Over time, the wire will age, and eventually lead to crack, fracture.
 
3. Don't smoke when using earphones. Everyone has a careless time, no matter earphone shell, earphone wire hot, hundreds of ocean you can not love? In addition, the soot will get into the earphone case and stick to the vibration film, which will make the sound wrong after a long time.
 
4. Turn down the volume before use. If your output device is too loud, not only will it shock your ears, but it will also shock the membrane folds. The heavy burned the voice coil of the earphone.
 
5. Keep earphones away from strong magnetic field. The magnetism of the unit's magnets will decrease, and over time the sensitivity will decrease!
 
6. Keep headphones away from moisture. The pad in the earphone unit rusts and the resistance increases, causing your earphone to skew.
 
7. Plug part. Some friends like to put mp3 what in trouser pocket, plug out line part is easy to fold, time is long will break line.
 
8. Don't dismantle. Curiosity is too strong, open to have a look. Some headphones are hard to disassemble, mx500 can't be opened without special methods, even if you open 80% is broken. If the small 2 is opened, it may break the shell or produce deviation sound. 888 and 808 are ok. It is easier to make.
 
9, it is best not to use outside in winter. Cold winter, wire is hard, brittle, excessive bending is easy to break wire. Do not heat the cable at this time, high temperature will accelerate the aging of the wire.
 
10. Stay away from chemicals. The paint on the earphone case is very dissolved in organic chemicals, making it ugly.

Scan the QR code to read on your phone

COPYRIGHT © 2019 Aesonic Electronics Co.,Ltd    All rights reserved