ABOUT US
PROFILE
Aesonic Electronics Co.,Ltd
It all stems from the persistent pursuit of perfect sound quality. We believe that the headset is not just a product, but also a spirit and a belief. It is this spirit and belief that nourish the strong growth of sound strength; it is also this spirit and belief that gives sound strength people higher pursuits and dreams. This is the philosophical view of the strong man.
-
Technology innovation
Aesonic has a professional ID design team and has worked closely with universities such as huazhong university of science and technology.
-
Acoustic power
Acoustic technology, in the field of acoustic technology, the company has mastered the dual diaphragm horn, ring iron, plane diaphragm horn and other special acoustic technology headset products solutions, with wonderful acoustic experience.
-
Electronic engineering
Aesonic has an outstanding software development team covering firmware development based on mainstream audio chip platforms, including hengxubes, qualcomm QCC/CSR, Rhoda Airoha, Realtek, etc.
-
Structural engineering
Aesonic has extensive project experience to provide industry-leading product ID design, structural design, acoustic design, hardware design, rf & antenna design, software design, algorithm design and other integrated system integration solutions for structural engineering.
-
Smart power
Aesonic is committed to automation, information technology and intelligence, and continues to build a modern smart factory with high standards and high efficiency. Continuous lean optimization of the production process, improve the flexible automation, and has introduced ERP, MES, WMS, PLM and other information systems, to improve the efficiency of production and management.
PRODUCTS
PRODUCTS CENTER
NEWS
NEWS CENTER
IPSUM新闻中心
OUR newJECT
Analysis of correct wearing mode of bluetooth headset
Earphones were originally two articulation units that were hung over the ear, and a number of varieties have been developed, mostly earphones, earplugs, earbuds, and the newly developed bone-conduction earphones. Headphones are the earliest type of headphones. Earplugs are a revolutionary breakthrough in the development of headphones, and their smaller size makes them easy to use outside. Due to the development of the city, the ambient noise is getting louder and louder. The in-ear earplug is a breakthrough of earplug products, which is more suitable for outdoor use. Earpiece can be regarded as an intermediate product between earpiece and earpiece. The characteristics of earpiece neutralize the advantages and disadvantages of earpiece and earpiece, belonging to a kind of product with unclear characteristics. However, as far as wearing is concerned, earpiece is very beautiful. Bone-conduction headphones are a relatively new technology that USES vibrations to direct sound through the skull to the listening center. But the product is not yet popular enough to revolutionize headphones.
How to measure the sound quality of a pair of headphones
There are some ways to measure earphones. However, the hearing sense of earphones is different from that of speakers. The sound waves emitted by the earphones attenuate and interfere in the air, and interact with the human head and ears. The quality of the sound of the earphone is more important than its technical performance. Since the shape of the head and ears are different, a pair of earphone will have different listening feelings for different people, so the recommendation can only be used as a reference. You must listen to the sound of the earphone in person if you have the opportunity.
Describe in detail the sound features of the headset
1, the voice bottom pure, without any unpleasant "hiss", "weng", "coax" sound. 2. Good sense of balance, sound color from light to dark, medium and low frequency energy distribution is even, the fusion between frequency bands is natural and smooth, without abrupt or burr 3, high frequency extension is good, fine and smooth. 4, low frequency dive deep, clean and full, full of elasticity and strength, without any feeling of fat, slow. 5, medium frequency distortion is minimal, transparent and warm, voice friendly natural, thickness, magnetic, not exaggerated and nasal. 6, good analytical power, rich in details, small signal can be clear replay. 7. Good ability to depict sound field, open sound field, accurate and stable instrument positioning, enough information in sound field, no empty feeling. 8, dynamic no obvious compression, with a good sense of speed, large volume of no distortion or very small distortion.
Analysis of advantages and development history of bluetooth headset
The first peripheral to use Bluetooth technology will be a wireless headset. According to Ericsson's schedule, the headset for Ericsson's T28 phones came out in July 2000. Nokia and Motorola waited until late 2000. By then, you can simply attach a Bluetooth technology attachment to your phone and place the headset into your ear. You can put the phone in your pocket, free your hands while talking, or even just press a button on the headset to answer the call. And because Ericsson T28 has voice recognition, you can make common calls simply by naming people. Another selling point of the headset: because Bluetooth's range of emission is much lower than that of normal mobile phones, manufacturers will have the opportunity to highlight its health benefits.
Here are 10 tips for maintaining your headphones
Once we have a headset, the first thing we need to do is to turn it on. We can enjoy it after we get it, but is it ok if we get it? Answer is not, the quality of some headphones themselves is very close, is because we usually do not take care in the use of our beloved headphones premature death! Below I repair the headset process often see the situation, to give you some maintenance advice!
Introduction to the difference between open and closed earphones
Open earphone shell is open, open earphone quality light, natural sound, no sense of pressure. Because it's open, sound leaks out, and external noise comes in. Semi-open earphone means that the earphone is open selectively, that is, it is only open to some frequencies and closed to others, or it is open in certain directions and closed to others. The enclosure of the closed earphone is closed to prevent the outside sound from entering and reduce the sound leakage, which is used in many professional monitoring. The sound is generally very clear, detailed, and low frequency responsive, and for most people the enclosed headphones have a closed feel
CONTACT
CONTACT US
Add: Aesonic Road, Xihe Industrial Park, Sijia,Shijie Town Dongguan City, Guangdong province, PRC
Tel: 86-769-83529129 Fax: 86-769-83237949 E-mail: sales@aesonic.com
Add: Aesonic Road, Xihe Industrial Park, Sijia,Shijie Town Dongguan City, Guangdong province, PRC
Tel: 86-769-83529129
Fax: 86-769-83237949
E-mail: sales@aesonic.com
COPYRIGHT © 2019 Aesonic Electronics Co.,Ltd All rights reserved 粤ICP备12069149号